欧美久久久精爱,国产黄色影视,狠狠色综合111,自产精品视频图像三,成人五月四射网,久久久久夜色国产精,青青草久在线,国内一区18,国产精品Av免费

英文MSDS庫(kù)
當(dāng)前位置:化工字典 > 英文MSDS
Name:
Zinc Iodide
Synonym:
None
CAS:
10139-47-6
Section 1 - Chemical Product
MSDS Name:Zinc Iodide
Synonym:None
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
10139-47-6 Zinc Iodide 100 233-396-0
Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Corrosive.Hygroscopic.Air sensitive.Light sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. Chronic ingestion of iodides during pregnancy has resulted in fetal death, severe goiter, and cretinoid appearance of the newborn.
Inhalation:
May cause allergic respiratory reaction. Causes chemical burns to the respiratory tract.
Chronic:
Prolonged exposure to iodides may produce iodism in sensitive individuals. Symptoms could include skin rash, running nose and headache.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. SPEED IS ESSENTIAL.
A DOCTOR MUST BE NOTIFIED AT ONCE.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation.
Do not allow contact with water. Avoid contact with air and sunlight. Discard contaminated shoes.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Corrosives area. Store protected from light and air. Store under an inert atmosphere.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR ??1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirators use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Crystalline powder
Appearance: almost white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 446 deg C
Autoignition Temperature: Not available.
Flash Point: 625 deg C ( 1,157.00 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: 625 C
Solubility in water: 4500 g/l (20 C)
Specific Gravity/Density: 4.7400
Molecular Formula: I2Zn
Molecular Weight: 319.189

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, dust generation, moisture, exposure to air, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen iodide, toxic fumes of zinc oxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 10139-47-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Zinc Iodide - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, NOS
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, NOS
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, NOS
Dangerous Goods Code: 8(22C)
UN Number: 1759

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 28 After contact with skin, wash immediately
with...
WGK (Water Danger/Protection)
CAS# 10139-47-6: No information available.
United Kingdom Occupational Exposure Limits

Canada
CAS# 10139-47-6 is listed on Canadas NDSL List.
CAS# 10139-47-6 is not listed on Canadas Ingredient Disclosure List.
Exposure Limits
CAS# 10139-47-6 (listed as ** undefined **): OEL-ARAB Republic of Egyp
t:TWA 0.1 mg/m3
US FEDERAL
TSCA
CAS# 10139-47-6 is listed on the TSCA inventory.

? 寻乌县| 清徐县| 澄迈县| 贵阳市| 界首市| 舟曲县| 镶黄旗| 苍山县| 湖北省| 泸州市| 茶陵县| 洱源县| 礼泉县| 沾益县| 大姚县| 三台县| 西充县| 深圳市| 安溪县| 洪洞县| 韩城市| 云阳县| 长汀县| 抚顺市| 中宁县| 鹤山市| 邳州市| 府谷县| 宝丰县| 新绛县| 彭泽县| 江孜县| 安新县| 重庆市| 林西县| 通州市| 分宜县| 宁远县| 开平市| 蒲江县| 仪陇县|